With an all new truck comes an all new suspension. Now available for the 2019 model year RAM 1500 4WD trucks BDS Suspension has released new 4” IFS lift systems. Based around the tried and true high clearance technology that has made BDS the go to for RAM suspension lifts, these systems have been designed from the ground up to get more out of your new RAM.
These NX² shocks give high-end performance at an affordable price. They use a pressurized nitrogen charged twin-tube design with 10-stage velocity sensitive valving for lightning fast dampening adaptive to whatever terrain you find yourself traversing on or off-road. The 2" bodied shocks use a large 1-3/8" fluon banded piston, self lubricating seals and a 14mm hardened chrome shaft to help resist rock chips and corrosion. The ends are dual welded for increased strength. Polyurethane bushings and metal sleeves are included to make swapping over your shocks a breeze. These shocks are offered in various stem and eyelet bushing configurations for custom applications and available to work with all current BDS lift kits. The exterior of the shocks are finishes in a durable metallic silver paint with NX² branded decals.
Specs:
- Increased ground clearance
- Levels the front with the rear of the vehicle
- Clears up to 35" tires
- Gives an aggresive look
Lift kit consists of:
- Front crossmember
- Front brake lines
- Front brake line brackets
- Front differential skid plate
- Break line drop brackets
- Steering knuckle
- Tie rod end
- Differential bracket mounting
- Driveshaft spacer
- Sway bar drop brackets
- Sway bar end link
- Rear crossmember
- Rear track bar bracket
- Bump stop extensions
- Upper control arms relocation brackets
- Strut spacers
- (2) BDS NX2 Nitro series shocks
Note:
- Cutting required
- Does NOT fit diesel models
- For models with STANDARD bore knuckle ONLY
- Fits factory Air Ride equipped trucks only
- Fits 4WD models equipped with factory air ride only.
- Extreme care/caution must be taken to follow the steps of instructions or damage to the bags during installation.
- The factory Air Ride is a closed loop system. Opening the system more times than recommended in the lift instructions will require the system to be recharged. This can be done at any Ram dealer service department. A scan tool is needed to access the air control module to perform the service
- Frame bracket modification required
- Stock 17" and 18" wheels cannot be re-installed, stock 20" wheels can only be re-installed with factory tire size
- If truck is equipped with factory 22" wheels use the "large hub bore" steering knuckles lift BDS1642H (NX2 shocks) or BDS1642FS (FOX shocks), kits sold separately