- Changing vehicle settings permanently - changes made to the vehicle permanently, will work even when the programmer is disconnected
- Changing vehicle settings live - changes are made live in real time and only work if the programmer is connected to the vehicle
- "Non-Menu" Live Functions are operations the Tazer Ram performs live, only while it is physically connected, and are not located in a menu. They are activated automatically or with button presses.
List of vehicle settings (engine off):
- read and clear DTCs system-wide or nonspecific modules
- change tire size
- change gear ratio
- change Transfer Case LOW ratio
- enable/disable TPMS system
- set TPMS pressure warning limit, front and rear, between 25psi and 85psi
- enable/disable backup camera
- enable/disable Cargo Camera input (8.4" and 12" NAV UConnect only)
- enable/disable CD (wired audio) input
- enable/disable TravelLink/XM traffic and weather
- change daytime running lights (DRL) region (CA/USA)
- change DRL location
- enable/disable DRL Dropout function
- enable/disable factory fog lights
- enable/disable Fog Light Dropout (when fogs shut off while high beams are on)
- enable/disable one-touch lane change
- enable/disable factory halo lights (including BCM output for adding halos)
- configure vehicle for LED 3rd brake light
- change headlight type (Std/LED)
- change fog light type (Std/LED)
- change tail light type (Std/LED)/delete sensor circuit for running aftermarket lights
- change front turn signal type (std/LED)/delete sensor circuit for running aftermarket lights
- enable/disable Trailer Tow setting
- activate MOPAR Power Folding Mirrors
- activate mirror turn signals
- activate tow mirror lights
- activate approach mirror lights
- enable/disable Aux Buttons
- enable/disable Blind Spot Detection (if the hardware is added or removed)
- enable MOPAR power side step
- disable front axle disconnect module for axle swaps
- disable rear locker for axle swaps
- disable electronic steering pump for hydraulic steering conversions
- change cluster splash screen
- enable/disable PANIC button on remote
- one-touch return-to-stock - quick "Unmarry" function returns to stock.
List of live functions (engine on):
- activate Light Show
- hold brakes at a red light
- enable navigation entry in-motion
- TurnCAM - activate backup camera when turn signals are used (5", 7", 8.4" and 12.1" UConnect) (excluding 2022 temporarily)
- Kill3Honk - disable three honks that sound when leaving running vehicle with keys
- ParkCam - activate SurroundView and front camera when front parking sensors are triggered
- automatically fold mirrors in/out on startup/shutdown
- override factory DRLs with amber DRL and turn on factory marker lights, including TRX hood lights in multiple modes (day, night or both)
- flash third brake light when braking
- customize third brake light flash pattern
- define Winch Mode RPM
- flash lights to indicate tire pressure while airing up/down
- Dark Mode - turn off all exterior lighting and dash/radio/shifter lights while parked with the engine running
- activate backup camera
- Force RWD (TRX only)
- activate 0-30 or 0-60 timer
- display firmware version
List of "Non-Menu" Live Functions:
(not in a menu - automatic or activated with button inputs only)
- AutoStopStart Disable - Tazer DT will automatically remember the last state of the auto stop/start system and set it for you the next time you start the vehicle
- AutoTracKill - Tazer DT will automatically remember the last state of the traction control system and set it for you the next time you start the vehicle
- Drive Mode Memory (TRX only) - Tazer DT will automatically remember drive mode and set it the next time you start the vehicle
- disconnect sway bar in 2WD up to 30mph or at any speed if mapped to a button
- Axle Locker Control - engage lockers in 2WD and 4Hi on demand.
- Cooldown Mode - turn on engine fans on-demand
- Winch Mode - raise idle RPM to user-selected value between 1300 and 2000
- Line Lock - lock the front brakes for an easy burnout
- Rock Crawl - lock all four brakes with a steering wheel button combo to hold the vehicle still, especially helpful when off-road
- TC Kill - turn off traction control, stability control and ABS
- show backup camera (shortcut)
- Turn Assist - lock the inside back tire for sharper turns (button remap function only)
- Remap buttons to:
- Any of the 8 light shows
- Backup cameras
- TC Kill
- Line Lock
- Rock Crawl
- Winch Mode
- Cooldown
- Front/Rear/Front+Rear Lockers
- SwayKill
- Dark Mode
- Turn Assist
- Force RWD - Partial Reboot
Notes:
- Can be used with only one vehicle (lock)
- Compatible with only 1500 DT (2018-2024) and TRX versions (2018-2024)
- Does not fit Classic models
- 2020 and newer vehicles have tire size limit 35", after which ParkSense function will be disabled. There is no way to bypass it
- Updates are completely free
