- Changing vehicle settings permanently - changes made to the vehicle, will work even when the programmer is disconnected
- Changing vehicle settings live - changes are made live in real time and only work if the programmer is connected to the vehicle
- "Non-Menu" Live Functions are operations the Tazer Ram performs live, only while it is physically connected, and are not located in a menu. They are activated automatically or with button presses.
List of vehicle settings (engine off):
- Light show - 6 pre-programmed and 3 custom light shows that flash all exterior lights - ideal for car shows/first responders/off-road visibility - controlled from remote control (key fob) or steering wheel buttons -can be turned on in motion for use in parades or off-road
- Change tire size
- Change gear ratio (max 4.50 on 4XE)
- Change transfer case LOW ratio
- Enable/disable TPMS warnings (Tire Pressure Monitoring System)
- Set TPMS pressure warning limit, front and rear, between 25psi/1.7bar and 85psi/5.8bar
- Enable/disable backup camera
- Enable/disable Cargo Camera input (8.4 UConnect only)
- Enable/disable TravelLink/XM Traffic and weather
- Activate Offroad Pages (after upgrade to 8.4" radio)
- Change Daytime Running Lights (DRL) location
- Enable/disable DRL Dropout (DRL turn off while using blinker)
- Enable/disable factory fog lights
- Enable/disable Fog Light Dropout (when fogs shut off while using high beams)
- Enable/disable one-touch lane change
- Enable/disable factory halo lights
- Change headlight type (Std/LED)
- Change fog light type (Std/LED)
- Change tail light type (Std/LED)/delete sensor circuit for aftermarket lights
- Change front turn signal (std/LED)/delete sensor circuit for aftermarket lights
- Enable/disable factory auto hi-beam
- Enable/disable Trailer Tow setting
- Disable electronic sway bar (if removed from the vehicle)
- Disable electronic steering pump (after hydraulic steering conversions)
- Enable the trailer brake controller (primarily Gladiator)
- Disable front and rear lockers for axle swaps
- Disable front axle disconnect module for axle swaps
- Declare the presence of a Drivetrain Control Module (Rubicon Transfer Case)
- Enable/disable Aux Buttons
- Enable/disable Blind Spot Detection
- Delete the seat belt reminder chime
- Enable/disable/change ParkSense configuration
- Change cluster splash screen
- Enable HVAC dual-zone switch assembly when upgrading from 5" radio
- Enable HomeLink (if HomeLink visor and harness are installed)
- Enable/disable auto dimming mirror (if installed)
- Enable Proximity Entry (if handles and harnesses are installed)
- Enable pickup bed outlet (Gladiator)
- Enable/disable auto headlights after sensors are installed
- Enable/disable PANIC button on remote
- "Unmarry" function returns to stock
List of Live Functions (engine on):
- Activate Light Show
- Hold brakes at red light (excluding 4XE)Use Garage Door Opener after shutdown
- Enable navigation entry in-motion
- TurnCAM - activate backup camera while using turn signals (5", 7" and 8.4" UConnect)
- Kill3Honk - deactivate three honks after leaving running vehicle
- Toggle hood alarm
- Enable passenger side heat on remote start
- Flash third brake light when braking
- Customize third brake light flash pattern
- Define Winch Mode RPM between 1250 and 2000 RPM (excl. 4XE)
- Flash lights to indicate tire pressure while filling
- Dark Mode - turn off all exterior and interior lighting while parked with the engine running
- Activate and cycle through camera inputs
- Display Vacuum/Boost Gauge
- Activate 0-30 timer and 0-60 timer
- Force RWD (392 only)
- Display firmware version
"Non-Menu" Live Functions:
- AutoStopStart disable - Tazer JL Mini will remember your last settings
- AutoTracKill - Tazer JL Mini will remember your last TC settings
- Disconnect sway bar in 2WD up to 30mph or at any speed if mapped to a button
- License Plate Blanking (Gladiator) - automatically turn off license plate light when in reverse or using TurnCam to reduce glare
- Light Show (shortcut)
- Open windows using keyfob (experimental, may not work with all bypass types)
- Line Lock - lock front brakes for easy burnout
- Disable ESP/TC by holding ESP button
- Cycle camera outputs (shortcut)
- Cooldown Mode - turn on engine fans, even when engine is off
- Winch Mode - raise idle RPM to selected value
- Partial Reboot
Remarks:
- Can be used with one car only (lock)
